Ok sans rancune. 
Si j'ai la chance un jour, je les écouterai. Pour les amplis, j'en doute pas du tout que certains modèles pro se sont grandement amélioré et sont plus musicale qu'avant.
Moi j'ai un ampli de type class D, qui est très musical et puissant, tout en douceur dans les hautes et un excellent soundstage, et je sais aussi que les préjugés sont très forts concernant ces amplis. Pour rejoindre ce que tu dis, l'ampli que j'ai (avec des condensateurs de liaison changés par du Clarity Cap ESA), ne correspond pas du tout à ce que l'on entend avec les autres class D, c'est à dire que c'est pas mal supérieure.
http://www.crownaudi...press/pr195.htmcela depend de ce que tu entend par "musicale" si tu recherche un ampli coloré qui ne reproduit pas exactement le signal tel qui le recois! et bien ce n'est pas un ampli "musicale" mais si tu recherche un son amplifié tel qu'il est reçu sans coloration et bien crown semble très neutre dans toute la gamme de fréquence, je ne dis pas qu'il n'est pas plaisant a écouter mais plutot qu'il semble linéaire et égale je le trouve très défini et détaillé lors de l'écoute beaucoup plus que mes 2 Bryston 4B (upgradé) les basse ont du punch et énorme réserve de basse !
mais bon je ne connais pas grand chose en audio pis mes oreilles sont rendu vielles! hehe j'ai peut-etre tout faux!!!!
Crown font maintenant du "direct switching" c-a-d plus de gros transfo de puissance avec tout les inconvénients relié a cela! sans compté le gain en poids! efficacité accrue......
The I-Tech series amplifiers feature a global power supply with Crown's proprietary Power Factor Correction (PFC). Adapters enable the amps to be powered virtually anywhere in the world, with AC ranging from 100V to 240V and at both 50Hz and 60Hz. The amps feature a high degree of common-mode rejection and nicely minimize hum and other RF issues. The interface is friendly and easily navigated, particularly if a computer is used to control these amplifiers with System Architect software. These amps sound great—with minimal harmonic and intermodulation distortion—due to the high-quality, high-resolution DSP—in particular, the FIR filtering, which virtually eliminates the phase distortion of IIR filtering. The front-panel USB slot nicely facilitates transferring presets with a jump drive. This is also the only amplifier with analog, AES/EBU, CobraNet, HiQnet, and Ethernet connectivity, and this makes it versatile when integrating it into existing infrastructure.
Amplifier technology continues to advance, and these amps represent the fifth generation of Class I design. This topology facilitates a lot of power from a small box. Crown has married this amplifier technology with some powerful DSP and control infrastructure and arrived at a truly excellent product.
John McJunkin is principal of Avalon Podcasting in Chandler, Ariz. He has consulted in the development of studios and installations, and he provides high-quality podcast-production services.
...The I-T12000 HD that I evaluated lists power ratings as follows: 2Ω dual, 3750W per channel; 4Ω dual, 4500W per channel; 8Ω dual, 2100W per channel; 4Ω bridge, 7500W; and 8Ω bridge, 9000W. Crown states in its specifications that these numbers represent guaranteed minimum power in watts at 20Hz to 20kHz with less than 0.1 percent THD. This is a very healthy dose of power—sometimes I still find myself shocked at the power output available in 2RU amplifiers these days. Aside from the solid and clean power output, this amplifier also offers a pretty substantial suite of available DSP—including 24-bit/192kHz Cirrus Logic A/D and D/A converters and infinite impulse response (IIR) and linear-phase finite impulse response (FIR) filters. Internally, the DSP math is handled with 32-bit, floating-point precision. The CPU's high-speed capacity indeed facilitates FIR filtering, arriving at vastly less phase incoherency.
- Company: Crown Audio
www.crownaudio.com - Product: I-T12000 HD
- Pros: Powerful amp coupled with excellent DSP and control.
- Cons: None to speak of.
- Applications: Any application that requires a networkable power amp.
- Price: $8,510 USD Note: c'est un ampli dans les 5 chiffres en dollars canadiens
SPECIFICATIONS - Input sensitivity: 1.28V-8V (in 0.1Vincrements)
- Frequency response: 20Hz-20kHz ±0.25dB
- Signal-to-noise ratio: >108dB
- THD: <0.1%
- IMD: <0.35%
- Latency: 1.16ms @ 48kHz, 529µs @ 96kHz
- Damping factor: >5000 Note: le damping facteur monte en fleche audessus de 5000 lorsque l'ont descent vraiment bas en fréquence!
- Crosstalk: >80dB
- CMR: >55dB, typically >70dB
- DC output offset: <±3mV
- Input impedance: 20kΩ balanced, 10kΩ balanced
- Load Impedance (dual): 1-2-4-8-16Ω
- Load impedance (bridged mono): 2-4-8Ω
- Dimensions: 19"x3.5"x16.2"
- Weight: 28lbs.
Class-I Circuitry
Patented 5th-generation Class-I circuitry provides terrific efficiency for strong performance with a low power draw
unparalleled sonicaccuracy and detail, putting sound quality above all else
Mes commentaires font référence au IT12000HD et aux autres amplis de la même ligne uniquement je ne peux me prononcer sur les autres gammes inférieur de Crown sauf la série "MA" qui semble la même que la gamme "IT" qui semble le même circuit d'amplification sans le "DSP"
au plaisir !
Ce message a été modifié par Patrice42 - lundi 05mars 2012 à 11:02 .